• Pc 62 6x6 label tile chip hires
  • Large pc62 application tiles and sake cup 2048px

PC-62 Textured Amber Brown

Price SKU Quantity
35474T

Enter the quantity for the item(s) you'd like to add to your cart.


Product Description

Textured Amber Brown is a glossy brown glaze that breaks lighter where thinner like a traditional temmoku glaze. This glaze layers well with our other Potter's Choice glazes and produces fluid, beautiful effects.

Due to the powdered nature of the materials involved with the dry-mix dipping buckets of this product, their respective health information and labels differ from the brushing glazes.

*Note that all dry dipping glazes can be difficult to layer. Dipping glazes behave differently from brushing and they require thorough testing prior to layering full piece.

Safety Warning

Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.

Product Details




Related Items

More from (PC) Potter's Choice »

+ Layering Top Coat

Here you will find some examples of PC-62 Textured Amber Brown over other Potter's Choice glazes. (2/2 Coats fired to cone 6 on AMACO's #46 Buff Stoneware)




+ Layering Base Coat

There are many Potter's Choice glaze colors providing a huge number of possible glaze layering combinations. Experiment with combinations of glazes, different numbers of coats of each glaze, (up to a total of three to four coats) and ways to layer the glazes on your clay pieces. 

The samples shown below are 2 coats over 2 coats fired to Cone 6 on AMACO's #46 Buff Stoneware.

Click each image to enlarge.

Downloadable PDF




+ Layering with Celadons

The Potter's Choice glazes produce unique and beautiful effects when layered with the celadon glazes and fired to cone 5/6. Be sure to use three coats of each glaze and let each coat dry completely between applications. These tiles were fired to cone 6 on AMACO's #11 A-mix




+ Layering with Shinos

Here are some examples of Potter's Choice Glazes over Shinos. These tiles show 3 coats of each glaze and have been fired to cone 6 on AMACO's #11 A-mix.




+ Layering with Texturizer

Here are some examples of Potter's Choice Glazes layered with Texturizer. If Texturizer is on the bottom, first brush on a layer of Texturizer, then lightly sponge it off. Next brush on 3 coats of Potter's Choice. Tiles show on AMACO'S #46 Buff Stoneware Clay and fired to cone 5/6.




+ California Prop 65 Warning

25 Lbs Dry

SymbolWARNING: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.