Velvet-1-Strokes have a high concentration of color and are excellent for detail and one stroke designs. They can be glazed over with a transparent or translucent glaze or left unglazed for that beautiful Velvet finish.

All colors in the V-1-S Series are LEAD FREE and AP NON-TOXIC.

Above: Amanda Perkins, Whitmer High School, Toledo, OH, created "Swallowed" with a variety of AMACO products.

Velvet-1-Strokes translucent underglazes from AMACO are as versatile as the original Velvet Underglazes. They are premixed and ready to use right from the jar.

They can also be glazed over  with a transparent or translucent glaze or left unglazed for that beautiful Velvet finish. Velvet-1-Strokes have a wide firing range from Cone 06 for earthenware to Cone 6 for stoneware and porcelain. They have a high concentration of color and are excellent for detail and one stroke designs.

Velvet-1-Strokes may be brushed on greenware which is to be bisque fired before applying a covering glaze or on a mature Cone 04 (1971°F, 1077°C) bisque, then a covering glaze applied. For opaque coverage by brushing, the consistency of the color in the jar is correct.

For best results with V-1-S-1317, V-1-S-1322, and V-1-S-1326, apply only two coats of LG-10 Clear Glaze.

Velvet-1-Strokes come in two ounce jars and an assortment of all 12 colors.

If left unglazed, AMACO® Velvet-1-Strokes should not be used on surfaces which come in contact with food or drink. AMACO® clear glazes LG-10, F-10, and HF-9 or any other dinnerware safe glaze are recommended to be used over AMACO® Velvet-1-Strokes to make them dinnerware safe.

AMACO® Velvet-1-Strokes have only been tested and approved as dinnerware safe when applied and fired under AMACO® LG-10 Clear Glaze.