Indian Red Clay No. 67 is a rich red color before and after firing and is an excellent plastic clay for all hand methods of modeling: slab, push and pull, coil, sculpture, and wheel throwing.

Indian Red Clay is AP Non-Toxic in Moist Form.
Dry clays with CL seal are restricted
from use K-6 (ASTM D-4236/LHAMA)

Lesson plans #9, #21, and #29 are some great projects utilizing this clay.

• Rich red color before and after firing
• AP Non-Toxic in moist form
• CL labeled for safety in dry form
• Extremely plastic - ideal clay for all hand methods of modeling: slab, push and pull, coil, sculpture, and wheel throwing
• 67-M will not slump and warp at low temperatures like other red clays
• Firing range of Cone 06-02 with best results at Cone 05
• Bisque is red at Cone 06 and a rich red brown at Cone 02
• Amaco® glazes maturing at Cone 06-04 can be used with this clay. Colored transparent Amaco® LG, LT, O and A series glazes create unique affects on 67-M

Clay in moist form presents no hazard.

Preparing Dry Clays
Always mix dry clay in a closed polyethylene bag. Combine one pound of dry clay with four to five ounces of water or 28% water by weight. Expel air in the bag and tie opening securely with string. Knead until clay and water are mixed thoroughly. Aging 24 hours or longer improves plasticity.

Packaging:
Moist Clay:
50 lb. - two 25 lb. blocks of clay in polyethelene bags are packed in a 50 lb. carton.
25 lb. - one 25 lb. block of clay in polyethelene bag packed in a carton.
Dry Clay:
50 lb. dry clay is supplied in multi-wall kraft bag.