Tropical Sunshine Necklace Project at AMACO.com

Craft Projects > Bead Rollers Projects > Tropical Sunshine Necklace

Purchase Tools/Access. Products Online

Purchase Brushes, Tools & Supplies Products Online

Tropical Sunshine Necklace
By Linda Peterson

Materials

• FIMO® Soft — Translucent (#014), Mandarin (#42), Sunflower (#16), Raspberry (#22)
• Liquid FIMO® Decorating Gel
• AMACO® Tri-Bead Roller™
• AMACO® Pro Bead Roller™ — Either Set 1 or 2
• AMACO® Bead Baking Rack
• AMACO® ArtEmboss® Pure Metal Sheets — Pewter
• AMACO® FunWireTM — Clear/Silver 22 Gauge and 24 Gauge
• Washers
• Misc. Silver Beads
• Pearl Ex Pigment Powder — Pumpkin Orange, Salmon Pink
• Jewelry Pliers — Fiskars
• Jewelry Wire Snips — Fiskars
• Beadalon® .018 Diameter 49 Flexible Beading Wire
• Halcraft., Inc. Toggle Clasps of Choice
• Halcraft Crimp Beads
• Paper Hole Punch, McGill® Inc.
• Toothpick

Step 1

Using the wooden stylus that came with the ArtEmboss® pewter, emboss metal with desired pattern or cut out the pattern provided.

Step 2

Mix a small amount of Salmon Pink PearlEx pigment into a quarter size drop of Liquid FIMO® Decorating Gel. Repeat this step with Pumpkin Orange.

Step 3

Using the toothpick, pick up one of the colors and apply directly onto front of metal (front has raised edges and is not the side you embossed). Apply one color to top and the second color to bottom. Blend where the colors meet with toothpick. Bake in oven for 30 minutes at 265ºF (130ºC). Allow to cool and repeat process for other side (this helps to keep the metal from de-bossing). Bake, let cool, and punch holes where desired.

Step 4

Mix one part Mandarin FIMO® Soft with four parts Translucent. Repeat this same mixture with Sunflower. Mix uneven amounts together to create a marble effect. Roll into ball and create bead with desired bead roller shape. Apply Pearl Ex pigments to the beads giving them a shine. Poke holes in beads with piercing pins (included with Pro Bead Roller™). Bake on Bead Baking Rack for 30 minutes at 265ºF (130ºC).

Jump Rings Step 5

Wrap 22 gauge FunWire™ around a pen or pencil. Snip off jump rings with jewelry snips/pliers.

Oval Beads Step 6

Thread 24 gauge FunWire™ through hole in bead, loop and cut off excess. Repeat with other side. Jump rings will attach to these loops.

Step 7

Add beads and washers as desired or follow the picture. String beads onto beading wire to finish, add crimp beads and toggles to complete.

Tropical Sunshine Necklace in PDF format

Get Acrobat Reader