Step 1
|
Remove handle of purse. Tear paper sacks into pieces and decoupage to outside of purse. Allow to dry. Randomly dab
Lumiere metallic paint to entire purse. Allow to dry.
|
Step 2
|
Cut a 3" piece of Fun Wire™. Punch two holes in bottle cap. Thread wire through holes.
|
Step 3
|
Flatten half package Gold FIMO® Soft to approximately 1/8". Stamp on designs. Tear to an irregular shape. Dust
baby powder into moon mold. Press a 1" round ball of Gold FIMO® Soft into face. Remove. Place into bottle cap. Bake
at 265°F for 30 minutes. Allow to cool. Rub with Rub ’n Buff® to highlight stamped design. Apply glue to face and
sprinkle on tiny glass marbles.
|
Step 4
|
Cut two pieces of WireForm® Armature Wire, 8 inches and 4 inches in length. Loop and swirl as desired. Hammer
flat.
|
Step 5
|
Dab Lumiere paint to photo mount. Add word. Apply glue to mount on corners. Add tiny glass marbles. Allow to dry.
|
Step 6
|
Collage together as shown in photo.
|
Step 7
|
Remove beads from purse handle. Wrap Fun Wire™ around handle using loops and swirls. Twist bottle cap wires
around small armature wire embellishment. Add fibers. Twist around top of handle. Screw handle back into purse.
|
Quote & Note Tote
Contact Us
