Note: Read and follow manufacturer’s instructions for all products used.
Note:
Wear gloves to protect hands.
Step 1
|
From the aluminum WireForm® Sparkle Mesh, measure and cut out:
Small candle holder: four 4" x 41/2" rectangles.
Medium candle holder: four 4" x 6" rectangles.
Large candle holder: four 4" x 71/2" rectangles.
|
Repeat the following instructions for each candle holder:
Step 2
|
Cut the two top corners off of the long end of each rectangle to form an “A” shaped peak.
|
Step 3
|
Wrap the four sparkle mesh rectangles around the tea light candle holder and secure with rubber bands.
|
Step 4
|
Pull two long wire strands from the brass WireForm®. Wrap these
wires around the candle holder as shown. Remove the rubber
bands.
|
Step 5
|
Fold each of the four sparkle mesh peaks downward as shown.
|
Step 6
|
Using the Christmas tree punch, punch out ten Christmas trees from the gold ArtEmboss® foil.
|
Step 7
|
Carefully punch a tiny hole at the top of each Christmas tree with the 1/16" hole punch.
|
Step 8
|
Attach the Christmas trees to the mesh using jump rings and needle nose pliers, as shown.
|
Step 9
|
Add tea candles to each candle holder for a beautiful holiday display.
|
Holiday Candle Holders
Contact Us
