• 764lg
  • Lg1 764
  • Lg2 764
  • Lg3 764
  • R 10 clear crackle
  • R 11 white crackle
  • R 12 bluebell
  • R 13 smokey blue
  • R 14 smokey lilac
  • R 15 caribbean blue
  • R 16 copper patina
  • R 17 tarnished silver
  • R 18 lustrous copper
  • R 19 copper matte
  • R 20 red crackle
  • R 21 yellow crackle

Class Pack: (R) Raku

Price SKU Quantity
35713N

Enter the quantity for the item(s) you'd like to add to your cart.


Product Description

CL glazes restricted from use K-6 (ASTM D-4236/LHAMA) This class pack contains one pint each of the following Raku glazes: R-10 Clear Crackle, R-11 White Crackle, R-20 Red Crackle, R-21 Yellow Crackle, R-12 Bluebell, R-13 Smokey Blue, R-14 Smokey Lilac, R-15 Carribean Blue, R-16 Copper Patina, R-17 Tarnished Silver, R-18 Lustrous Copper, and R-19 Copper Matte. These glazes must be fired in a proper raku for their intended effects- see Raku Glazes page for more information.
AMACO® reserves the right to substitute a glaze or underglaze of similar color and equal or greater value when necessary and without prior notice.

Safety Warning

Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.

Product Details




Related Items

More from Class Packs and Sets »
More from Specialty Glazes »
More from Class Packs and Sets »

+ How To:

Our Raku glazes do not produce the very dramatic effects you see in our catalog until they have been reduced in a RAKU firing. Remember that these glazes need to be fired to their recommended temperature of Cone 05 (1911°F, 1044°C). Once they reach temperature, turn off the kiln; let it cool to about 1700°F, 944°C before you pull the pieces out of the kiln with the tongs. You must protect yourself from the heat when you open the kiln at that high of a temperature. Therefore, wear heat and fireproof protective clothing, use high temperature gloves, and an appropriate respirator to protect from smoke. If you are using an electric kiln, never pull material out of the kiln unless the kiln is turned off.

RAKU is a very unpredictable medium and is affected by many variables. The effects achieved with these or any other RAKU glazes may not always be the same. Even after you have done RAKU for a long time you will see that it is almost impossible to have complete control over the result or a consistent glaze effect even if you are using the glaze from the same jar. However this is a spontaneous technique and all the varied effects are usually acceptable. Tong marks and other marks from reduction material is considered a characteristic of RAKU, not a defect.

Warning: Firing RAKU is an action filled procedure. Two or more persons are needed to unload and reduce the Raku piece. Whether you are firing in a gas or electric kiln you are being exposed to heat, fire, and smoke. You must be aware of this environment at all times, be prepared for it and act accordingly. You must wear heat and fire protective clothing, fire proof gloves and a mask appropriate for smoke. A NIOSH approved mask like 3M’s 3600 or a comparable quality mask is recommended. Make sure you cannot smell any smoke when you have the mask on. Never open an electric kiln when the switches are in the on position. All switches must be off before you load or unload the kiln. Always use tongs to carry hot pots from the kiln or from the reduction bucket. The reduction bucket must always be outdoors. RAKU gas kilns are usually outdoors but even if you are using an electric kiln you still have to take the pieces outdoors to reduce them. Do not be concerned about the piece cooling in the process, because it will still be hot enough no matter how far you have to carry it outdoors.

RAKU can be safe and exciting when the right precautions are taken. RAKU is not for children. This technique is for adults or college students only.