Crea-Stone Instructions
1. Thoroughly mix Crea-Stone in its container so that particles are evenly distributed.
2. Pour Crea-Stone into plastic or metal container, and stir in two pints of water for each five pounds of Crea-Stone.
3. Stir until mixture is thoroughly moistened.
4. Slowly add approximately one and one-half additional pints of water for each five pounds of Crea-Stone./p>
5. Mix thoroughly, stirring from the bottom.
6. Pour into form or box.
7. Insert stick into form and agitate mixture; tap sides of container to remove air bubbles.
8. Allow to harden until desired degree of firmness is reached and carve into shape desired.
WARNING: May be irritating to the eyes. Keep away from the eyes. If eye contact occurs, wash eyes out with tap water for 5 minutes. See a physician if irritation persists. Keep out of reach of children. Not for use in health care facilities. For further health information, call a poison control center.
Request Material Safety Data Sheets, when using in a manufacturing environment.
Contact Us
