Craft Project - Rose in the Snow Ornament

By Elizabeth Vernier

Materials

Glass Ornament
FIMO® Soft Polymer Clay — (1) Metallic Red, (1) Metallic Green, (2) Gold
Liquid FIMO® Decorating Gel
FIMO® Lacquer — Gloss
AMACO® Design Push Molds — Roses
AMACO® Pasta Machine
AMACO® Needle Tool
Ultra Fine Prism Glitter
Ribbons and Cord (as desired)
Small Disposable Cups
Cornstarch Baby Powder
Plain Paper (for work surface)
Ruler
Sharp Knife
Paint Brushes
Scissors

Step 1
Condition small amount of Metallic Red FIMO® Soft. Roll eight pea-sized balls, four slightly larger balls and five slightly smaller balls. Dust rose mold cavities with baby powder. Make eight medium, four large and five small roses. Bake on paper-covered cookie sheet in preheated oven at 265°F (129°C) for 15 minutes.

Step 2
Condition Metallic Green FIMO® Soft. Roll into ten small, sixteen medium and eight large balls. Flatten balls, pinch into leaf shapes. Dust leaf cavities on mold with baby powder. Press clay into molds to make leaves. Attach leaves to backs of roses. If leaves do not adhere to roses, attach with small amount of Liquid FIMO® Decorating Gel. Set aside.

Step 3
Condition Gold FIMO® Soft (between two and four ounces). Measure diameter of glass ornament. Roll conditioned Gold FIMO® Soft through pasta machine on thickest setting.

Step 4
Roll out strip at least two-inches wide and several inches longer than diameter measurement. Use ruler to mark strip two-inches wide and the same length as diameter. Cut strip with sharp knife. Wrap strip around ornament and press gently to seal. Edges should meet but not overlap. Blend seams together with fingertips. At top and bottom of ornament, pinch folds of excess clay together and trim away with scissors. Smooth clay with fingertips.

Step 5
Cut circle of clay to cover bottom of ornament. Blend edges together with fingers. Cut circle to fit top. Cut slit for ornament hanger. Press in place and blend seams with fingertips. Make ornament as smooth as possible. If air bubbles form, slice open with sharp knife, then seal with fingertips.

Step 6
Attach roses with Liquid FIMO® Decorating Gel. Bake ornament at 265°F (129°C) for 35 minutes. Let cool completely. Mix FIMO® Lacuqer with the ultra fine prism glitter and brush onto ornament. Let dry.

Rose in the Snow Ornament in PDF format