Craft Project - Make It In Metal

By Linda Peterson

Materials

Amaco® ArtEmboss®— Medium Pewter, Bright Gold
Double-sided tape
FiberMark: White Board
Jewelry findings of choice

Step 1
Cut out pattern from white board. Place pattern onto Pewter ArtEmboss® and cut out, leaving 1/4″ border around all sides. Fold metal around to back. Apply double-stick tape to back. Cut out additional Pewter ArtEmboss® from pattern and apply to back.

Step 2
Run wooden stylus around metal to make them lay flat. Use wooden stylus to make tiny indentations around border.

Step 3
Crumple up a piece of ArtEmboss® Bright Gold. Open and flatten out as smooth as possible allowing small creases to remain. Cut into asymetrical shape. Apply double-stick tape to back and press onto front of pendant where desired.

Step 4
From a scrap piece of pewter, draw a spiral with the stylus then cut out. Apply double-stick tape to back and apply to front center of pendant.

Step 5
Punch with 1/16″ paper punch. Add jump rings and other jewelry findings to complete pendant and earings.